Despite your best efforts to keep your bounce house clean and well-maintained, accidents can still happen. A small tear or hole in the vinyl material can quickly turn into a larger problem if not addressed promptly. In this post, we’ll discuss how to patch a hole in your bounce house.
The first step in patching a hole is to locate the damage. Inflate your bounce house and inspect it carefully for any tears, punctures, or holes. Once you’ve located the damage, use a marker or chalk to mark the edges of the hole. This will make it easier to apply the patch later.
Next, clean the area around the hole with a soft cloth and rubbing alcohol. This will remove any dirt or debris that could interfere with the adhesive on the patch.
Once the area is clean, it’s time to apply the patch. There are a few different types of patches available, including vinyl patches and adhesive patches. Vinyl patches are typically more durable and long-lasting, but adhesive patches are easier to apply.
To apply a vinyl patch, cut a piece of vinyl material slightly larger than the hole. Round the corners of the patch to prevent it from peeling up over time. Apply a small amount of vinyl adhesive to the back of the patch and place it over the hole, smoothing out any wrinkles or air bubbles. Allow the adhesive to dry completely before using the inflatable.
If you’re using an adhesive patch, simply peel off the backing and apply the patch over the hole, smoothing out any wrinkles or air bubbles. Press down firmly on the patch to ensure it adheres properly.
After applying the patch, it’s important to allow it to dry completely before using the inflatable again. This may take several hours, depending on the type of patch and the temperature and humidity of your environment.
In conclusion, patching a hole in your bounce house is a relatively simple process that can save you the cost of having to replace the entire inflatable. Locate the damage, clean the area, and apply the patch according to the instructions provided. Allow the patch to dry completely before using the bounce house again. Remember, prevention is the best approach, so make sure to set up your bounce house on a level, clear surface, and avoid placing it near sharp objects that could puncture the vinyl material.
